The Fastest delivery ability of high precision PCB manufacturer.
Rigid PCB Aluminum PCB Flexible PCB PCB Assembly Manufacturing capacity

FR4 PCB Assembly

Prev Next
FR4 PCB Assembly


Base Material: fr4

Copper Thickness: 1oz

Board Thickness: 1.6mm

Min. Hole Size: 0.2mm

Min. Line Width: 0.1mm

Min. Line Spacing: 0.1mm

Surface Finishing: hasl

Solder Mask: green

Silk Screen: white


FR4 PCBA PCB Assembly

with quick turn service within 24 hours



Digital camera

Liquid crystal television

LED lighting

Similar items

read more

  • Details

FR4 PCBA PCB Assembly with Modern Technology

Layout principles

1. Signal flow layout principle: signal flow arrangement -- left input, up input, down output. Avoid interleaving of input, output, high and low levels.

2. Proximity principle: consider the shape of each component. Size. Polarity and number of pins, for the purpose of shortening the alignment, adjust their position and direction.

3. Arrangement sequence principle: take each functional circuit as the core component (integrated circuit) as the center, and arrange around it -- the components belonging to the same functional module circuit are arranged together as much as possible. The components which are easy to produce mutual influence or electromagnetic interference should be kept away from or shielded as far as possible. As far as possible, the metal shell components should avoid contact, so as to avoid accidental short circuit caused by discharge, breakdown.

4. Principle of heat dissipation: heating elements should be arranged close to the shell or well-ventilated place with a radiator. For temperature-sensitive components, they should not be placed near the heat source or the upper part of the equipment.

5. Increase the mechanical strength of principle: mainly for large and heavy components, such as power transformer, large electrolytic capacitor, with heat sink of power transistor, etc., of the circuit board layout to pay attention to its center of gravity, gravity and vibration generated under the influence of mechanical stress, electronic print should use mechanical frame or braces, so as to avoid deformation. These components can be transferred to the base if necessary.

6. The principle of easy operation and safety: the arrangement of the whole machine structure should be considered when adjusting the original. In order to ensure the safety of debugging and maintenance, special attention should be paid to the components with high pressure, as far as possible in the operation of human hands can not easily touch.

FR4 PCBA PCB Assembly1

FR4 Made Ability

 NO  Item Craft Ability

Surface Finishh

HASL,Immersion Gold,Gold Plating,OSP,Immersion Tin,etc
2 Layer 2-30 layers
3 Min. Line Width 3 mil
4 Min. Line Space
3 mil
5 Min. Space between Pad to Pad 3 mil
6 Min.Hole Diameter 0.10 mm
7 Min. Bonding Pad Diameter 10 mil
8 Max. Proportion of Drilling Hole and Board Thickness 1:12:5
9 Max. Size of Finish Board 23 inch*35 inch
10 Rang of Finish Board's Thickness 0.21-7.0 mm
11 Min. Thickness of Soldermask 10 um
12 Soldermask Green,Yellow,Black,White,Red,Transparent photosensitive solder mask,Strippable solder mask
13 Min. Linewidth of Idents 4 mil
14 Min. Height of Idents 25 mil
15 Color of Silk-screen White,Yellow,Black
16 Date File Format Gerber file and Drilling file,Report series,PADS 2000 series,Powerpcb series,ODB++
17 E-testing 100% E-Testing:High Voltage Testing
18 Material for PCB

High TG Material:High Frequence

(ROGERS,TEFLON,TADONIC,ARLON):Halogen-free Material 

19 Other Test Impedance Testing,Resistance Testing,Microsection etc
20 Special Technological Requirement
Blind&Buried Vias and High Thickness Copper

FR4 PCBA Quality Requirement

1.on-time delivery:≥97% 
2.double layer board acceptability≥99% 
3.four-layer board acceptability:≥98% 
4.six-layer board acceptability:≥97% 
5.eight-layer board acceptability:≥97% 
6.ten-layer board acceptability:≥95% 
7.customer satisfaction :≥90% 
8.complaint rate/rejected rate:≤ 3%

PCB Assembly Certificates

UL, TS16949, ISO14001, ISO9001-2008, and RoHS


Q: What is the MOQ?

A: The minimum order quantity of circuit board is 5pcs.

Q: What the package of the products?

A: We use vacuum packaging.

Q: Do you accept products design with different boards on the same panel?

A: Of course, we can do different boards on the same panel.

Q:What kind of material do you use in my design pcba?

A: We usually use FR4. And you can download FR4 Made Ability.

Q:What color is solder mask usually used in FR4 PCBA?

A : We usually use green in your custom PCBA.

Q: What kind of material do you use on PCBA PCB assembly surface finishing ?

A: FR4 PCB assembly usually uses HASL.

Picture Of Details

FR4 PCBA PCB Assembly4

FR4 PCBA PCB Assembly3

FR4 PCBA PCB Assembly5